Standard Horizon HX-870 - Manual (Page 118)

Page 118 HX870
16.12 LOGGER INTERVAL
1. Press the MENU key to display “MENU”.
DSC SETUP
GM SETUP
BACK
SETUP
WAYPOINT SETUP
CH SETUP
GPS SETUP
ATIS SETUP
SELECT
UNITS OF MEASURE
PINNING
POSITION INPUT
D-GPS
OUTPUT SENTENCES
LOGGER INTERVAL
LOG ERASE
GPS SETUP
BACK SELECT
ON
ON
5sec
BACK
GPS SETUP
15sec
30sec
1min
5min
ENTER
LOGGER INTERVAL
2. Select “SETUP” with the CH▼/CH▲/◄/►
key, then press the [SELECT] soft key.
3. Select “GPS SETUP” with the CH▼/CH▲ key,
then press the [SELECT] soft key.
4. Select “LOGGER INTERVAL” with the CH▼/
CH▲ key, then press the [SELECT] soft key.
5. Press the CH▼/CH▲ key to select the
desired time and press the [ENTER] soft
key.
Note: Log time for each logger interval
setting
5 sec
: Aprox. 8 hours
15 sec : Aprox. 25 hours
30 sec : Aprox. 50 hours
1 min : Aprox. 100 hours
5 min : Aprox. 500 hours
6. Press the CLR key to return to radio operation.
16.13 LOG ERASE
1. Press the MENU key to display “MENU”.
DSC SETUP
GM SETUP
BACK
SETUP
WAYPOINT SETUP
CH SETUP
GPS SETUP
ATIS SETUP
SELECT
UNITS OF MEASURE
PINNING
POSITION INPUT
D-GPS
OUTPUT SENTENCES
LOGGER INTERVAL
LOG ERASE
GPS SETUP
BACK SELECT
ON
ON
CANCEL
BACK
GPS SETUP
OK
ENTER
LOG ERASE
2. Select “SETUP” with the CH▼/CH▲/◄/►
key, then press the [SELECT] soft key.
3. Select “GPS SETUP” with the CH▼/CH▲ key,
then press the [SELECT] soft key.
4. Select “LOG ERASE” with the CH▼/CH▲ key,
then press the [SELECT] soft key.
5. Press the CH▼/CH▲ key to select “CANCEL”
or “OK”, then press the [ENTER] soft key.
6. Press the CLR key to return to radio opera-
tion.