Standard Horizon HX-870 - Manual (Page 83)

Page 83 HX870
Editing a Waypoint
This function allows a previously entered waypoint to be edited.
1. Press the
MENU key to display “MENU”.
DSC SETUP
GM SETUP
BACK
SETUP
WAYPOINT SETUP
CH SETUP
GPS SETUP
ATIS SETUP
SELECT
MARK POSITION
WAYPOINT DIR.
DISPLAY RANGE
ROUTE DIR.
ARRIVAL RANGE
ROUTING OPERATION
WAYPOINT SETUP
BACK SELECT
ADD
WAYPOINT SETUP
EDIT
DELETE
WAYPOINT DIR.
BACK SELECT
Standard
USCG
WAYPOINT DIR.
BACK SELECT
EDIT
KAREN
366901254
BOB
Horizon-1
Horizon-2
NAME:
STANDARD---------
ENTER
WAYPOINT DIR.
BACK
SAVE
POSITION:
34°25.975 S
118°59.456 W
2. Select “SETUP” with the CH▼/CH▲/◄/►
key, then press the [SELECT] soft key.
3. Press the CH▼/CH▲ key to select “WAYPOINT
SETUP ”, then press the [SELECT] soft key.
4. Press the CH▼/CH▲ key to select
“WAYPOINT DIR.”, then press the [SELECT]
soft key.
5. Select “EDIT” with the CH▼/CH▲ key, then
press the [SELECT] soft key.
6. Press the CH▼/CH▲ key to select the
waypoint to be edited, then press the
[SELECT] soft key to show the waypoint
input display.
7. Select “NAME” or “POSITION” with the CH▼/
CH▲ key, then press the [SELECT] soft key.
8. Press the CH▼/CH▲/◄/► key to select
“←” or “→”, press the [SELECT] soft key
until the character to be changed is selected,
then enter a new character.
9. Repeat step 8 until the waypoint is updated.
When finished editing, press the [FINISH] soft key.
10. Select “SAVE” with the CH▼/CH▲ key, then press the [SELECT] soft key
to store the edited waypoint into memory.
11. Press the CLR key to return to radio operation.