Standard Horizon HX-870 - Manual (Page 87)

Page 87 HX870
8. Select “ROUTE” with the CH▼/CH▲ key,
press the [SELECT] soft key. NAME:
001RUT----------
SELECT
ROUTE DIR.
BACK
ROUTE
SAVE
WPT:
Via1:
DISPLAY RANGE
ROUTE DIR.
ARRIVED RANGE
ROUTING OPERATION
001RUT__________
BACK SELECT
Standard
USCG
ROUTE DIR.
BACK SELECT
KAREN
366901254
BOB
YAESU
Horizon-1
Horizon-2
WPT:KAREN
Via1:
DISPLAY RANGE
ROUTE DIR.
ARRIVED RANGE
ROUTING OPERATION
001RUT__________
BACK SELECT
NAME:
001RUT----------
SELECT
ROUTE DIR.
BACK
ROUTE
SAVE
9. Select “WPT” with the CH▼/CH▲ key, then
press the [SELECT] soft key.
10. Press the CH▼/CH▲ key to select a
waypoint, then press the [SELECT] soft key.
11. Select “Via1” with the CH▼/CH▲ key, then
press the [SELECT] soft key.
12. Press the CH▼/CH▲ key to select a
waypoint, then press the [SELECT] soft key.
13. Repeat steps 11 and 12 to add more via-
points.
14. Press the [BACK] soft key.
15. Select “SAVE” with the CH▼/CH▲ key, then
press the [SELECT] soft key to store the
route into memory.
16. Press the CLR key to return to radio operation.
Editing a Route
This function allows a previously entered route to be edited.
1. Press the
MENU key to display “MENU”.
DSC SETUP
GM SETUP
BACK
SETUP
WAYPOINT SETUP
CH SETUP
GPS SETUP
ATIS SETUP
SELECT
MARK POSITION
WAYPOINT DIR.
DISPLAY RANGE
ROUTE DIR.
ARRIVAL RANGE
ROUTING OPERATION
WAYPOINT SETUP
BACK SELECT
ADD
WAYPOINT SETUP
EDIT
DELETE
ROUTE DIR.
BACK SELECT
Standard
USCG
ROUTE DIR.
BACK SELECT
EDIT
KAREN
366901254
BOB
Horizon-1
Horizon-2
NAME:
KAREN----------
SELECT
ROUTE DIR.
BACK
ROUTE
SAVE
2. Select “SETUP” with the CH▼/CH▲/◄/►
key, then press the [SELECT] soft key.
3. Press the CH▼/CH▲ key to select “WAYPOINT
SETUP ”, then press the [SELECT] soft key.
4. Press the CH▼/CH▲ key to select “ROUTE
DIR. ”, then press the [SELECT] soft key.
5. Select “EDIT” with the CH▼/CH▲ key, then
press the [SELECT] soft key.
6. Press the CH▼/CH▲ key to select the route
to be edited, then press the [SELECT] soft
key to show the route input display.
7. Perform steps 6 to 14 of the previous page
until the route is updated.
8. Select “SAVE” with the CH▼/CH▲ key, then
press the [SELECT] soft key to store the
edited route into memory.
9. Press the CLR key to return to radio operation.