Gasboy Fuel Point Vehicle Module - Manual (Page 42)

Operation Programmer Operating Modes
Page 5-14 MDE-4524A Vehicle Module Programming Manual· May 2006
3 Hold the Programmer near the vehicle's T-Ring. A series of beeps will be heard while the
Programmer gathers the data.
HOLD PROGRAMMER
NEAR TANK RING
4 The Programmer displays the first field. If you do not want to make any changes, press the
ENTER key to advance to the next field.
YES
ENTER
ENTER VM NUMBER:
00288
ENTER VEHICLE:
5931
5 To make changes, press the CLR key to clear the data, then enter the new data. When finished,
press ENTER to advance to the next field.
YES
ENTER
1 9 3
DEF
5
JKL
NO
CLR
ENTER VEHICLE:
5931
ENTER VEHICLE:
????
6 Make changes to as many fields as necessary. Once all fields have been accepted, hold the
Programmer near the T-Ring.
YES
ENTER
YES
ENTER
ENTER LIMIT:
8
ENTER AUTH:
2
HOLD PROGRAMMER
NEAR TANK RING
7 A series of beeps will be heard while the VM is being Programmed.
8 When programming is complete, a long beep will be heard.
9 The Programmer turns off automatically.