Gasboy Fuel Point Vehicle Module - Manual (Page 18)

Preparation for Programming Expiration Date (Enter EXPIRE)
Page 4-4 MDE-4524A Vehicle Module Programming Manual· May 2006
If this part is present, there are 3 possible values:
0 = data will be entered through card reader keypad and the entered data will be shown on the
reader display
1 = data will be entered through the card reader keypad and the data will be shown as asterisks
(*) on the reader display for security purposes
2 = the data will be entered through the card reader via a special Fuel Point card
Optional Part 2
Question marks 5 and 6 prompt for the second optional part. If this part is not included (only 5
question marks shown), the maximum number of digits gathered from the card reader will be
whatever the card reader will allow (for example, the Gasboy ICR will allow 16 digits), and
the card reader entry prompt will be the default prompt loaded in the SCII FUELPT Global
Parameters.
If this part is present, there are 3 possible values:
0 = maximum number of digits gathered will be whatever the card reader will allow
1-16 = maximum number of digits gathered via keypad entry
1-19 = maximum number of digits gathered via a special Reader Entry data card
Optional Part 3
Question marks 7 through 26 prompt for the message to display at the card reader when
prompting for the Reader Entry data. If this part is not present, the prompt at the card reader
will be the default prompt loaded in the SCII FUELPT Global Parameters. If this part is
present, it allows you to enter a card reader prompt unique to each VM. For example, you may
want to have all of the pooled-cars prompt ENTER EMPLOYEE and all of the off-road
vehicles prompt ENTER JOB.
Expiration Date (Enter EXPIRE)
The Expiration Date is assigned to establish a lifetime for the VM. FleetKey uses 4 digits
(YYMM) and CFN systems may use either 4 digits (YYMM) or 2 digits (YY). If programmed
with all zeros in the field, expiration is ignored.