Gasboy TopKAT Fuel Management System Installation - Manual (Page 48)

Mechanical Interface Option Terminal Block ID
Page 42 MDE-4319E TopKAT™ Fuel Management System Installation Manual · August 2008
Terminal Block ID
Figure 7-3 shows the mechanical interface components. Refer to “Terminal Block ID” on
page 24 for the TopKAT Comm Assembly.
To gain access to the inside of the TopKAT system, proceed as follows:
1 Unlock the rear door and open it completely.
2 Unscrew the two captive screws holding the hood in place.
3 Slide the hood towards the rear of the unit (about 1”) and lift it straight up.
The view in Figure 7-3 is from the rear of the electronic housing assembly.
Figure 7-3: Mechanical Interface Components