Gasboy TopKAT Fuel Management System Installation - Manual (Page 30)

General Installation Terminal Block ID
Page 24 MDE-4319E TopKAT™ Fuel Management System Installation Manual · August 2008
Terminal Block ID
All communication wiring to the TopKAT system is terminated to green wiring connectors on
the communication board or the electronic housing assembly.
To gain access to the inside of the TopKAT system, proceed as follows:
1 Unlock the rear door and open it completely.
2 Unscrew the two captive screws, while holding the hood in place.
3 Slide the hood towards the rear of the unit (about 1 inch) and lift it straight up.
The left side of the electronic housing assembly is shown in Figure 4-3 .
Figure 4-3: Electronic Housing Assembly - Left Side