Contemporary Control Systems BASview - Manual (Page 8)

TD110500-0MC
8
Driver Configuration

Enter in your driver configuration.

For BACnet use a system-wide unique Device ID.

The standard BACnet port number is 47808.

Enter a label for the driver and press Finish.
Add a Device to a Driver

In the Device Tree, right-click a driver and select New Device.

A Device Wizard appears so you can enter device parameters or, with BACnet, discover a device.

For BACnet, as shown below, press the Scan button to discover BACnet devices.

Press Finish on the next popup window.
Figure 8 — Driver Configuration
Figure 9 — Adding a Device