Contemporary Control Systems BASview - Manual (Page 49)

TD110500-0MC
49
Mobile Interface
When accessing the BASview from an Android, iPhone or similar device, Adobe Flash technology is often
not an option. Even if your device uses flash, it could be difficult to properly display the BASview graphics
and interact with it. For such cases, the limited functionality Mobile Interface is available using HTML
and can be used with a computer browser, if desired. But regardless of how you access this interface,
JavaScript and cookies must be enabled in your browser.
Figure 16 — Mobile Interface Login Screen
You can access the Mobile Interface via the flash login shown in Figure 16 or directly at the location
below
— except that you must replace the exes with the IP address of your BASview:
http://xxx.xxx.xxx.xxx/mobile
The Mobile Interface displays just the point status of graphics. You can enhance what this interface
reports by creating special graphics that contain all points that you must monitor or remotely control.
In the example navigation tree of Figure 17, click underlined or bold face options to expand the tree element.
Figure 18 is an example of an overview of HVAC zones. Figure 19 shows the detail of one such zone.
Figure 17 — Mobile Interface Navigation
Figure 18 — Zones Overview
Figure 19 — Zone1 Detail