Contemporary Control Systems BASview - Manual (Page 76)

TD110500-0MC
76
Site Settings
The site settings are only used in the Info screen. They are for informational purposes only and do not
affect the operation of the system.
General Tab
Site Description
This should be a general description or name of the site (up to 32 characters).
Address/Details
This should be the address of the site
— with any other information desired (up to 512 characters).
Contacts Tab
Emergency Contacts
This is whom to contact in case of an emergency (up to 1024 characters).
Service Tab
The service tab contains information about the company that installed the system or the company
responsible for servicing the site.
Service Contact
This should be the contact information of the service company (up to 1024 characters).
Service URL
This can be the URL (web site address) of the service company. It must be a full URL (with the http://).
Upload Image
Click this button to upload a small company logo or other image (JPG, GIF, or PNG) to display in the service
tab on the Info Page. The image width must be twice the height
— or else the image will be distorted.
String Point Wizard
Below are the settings for points with a point type of string.
String Settings Tab
Allow this point to be manually changed by users
This checkbox must be selected for the point to be modifiable by the user.