Contemporary Control Systems BASview - Manual (Page 26)

TD110500-0MC
26
Group Settings Tab
These determine which user g roups can see this item in the tree. Unchecking the default “Allow Everyone”
enables selecting individual groups. If a group cannot see an item, items under it are also unseen.
There are “Check All” and “Uncheck All” buttons in the upper-right corner to make major changes easier.
Advanced Tab
Name
Name is used for advanced features. If left blank, it will be assigned automatically. It is recommended
that the default value not be changed. It can be up to 48 characters. Only A
–Z, a–z, 0–9, period (.) and
underscore (_) are allowed. Names are case sensitive.
Date/Time Point Wizard
Below are the settings for points with a point type of DateTime.
Date/Time Settings Tab
Allow this point to be manually changed by users
This checkbox must be selected for the point to be modifiable by the user.
Devices
A device is any physical device, panel or I/O unit in the system.
Supported devices include:

LonWorks Device

Modbus Serial Device

Modbus/TCP Device

BACnet/IP Device