beautypg.com

Ku-band lnb installation, Lnb i – Comtech EF Data LCS-4 User Manual

Page 38

background image

LCS-4 L-Band Combiner Switch

Revision 1

Low Noise Block Assembly

MN/LCS4.IOM

4.4.4 K

U

-B

AND

LNB I

NSTALLATION

The Ku-Band LNB is mounted to the OMT, as follows:

1. Remove the protective cover from the antenna OMT and LNB.
2. Install the appropriate gasket on the antenna end of the LNB, as follows:


a. If only one of the mounting surfaces has a groove, use the half-thick gasket.
b. If both mounting surfaces have grooves, use the full thick gasket.

3.

Position the LNB (with gasket) in place on the antenna and fasten using the supplied
hardware.


4–10

See also other documents in the category Comtech EF Data Equipment: