Comtech EF Data SMS-301 User Manual
Page 66
Operation
SMS-301 Redundancy Switch
3-28
Rev. 3
REV EMULATION
Programs an emulation mode of the previous functional revision. This
allows the operator to select the CURRENT VERSION or
FUNCTIONAL X:
Note: The number displayed in the CURRENT VERSION position
increases with each software version change.
Upon entry, the CURRENT VERSION is displayed. Press [
↑] or [↓] to
select the FUNCTIONAL version. Press [ENTER] to execute the
change.
Notes:
1.
Programming a current version (default) allows all features and
options (if installed) to operate normally.
2.
Programming a FUNCTIONAL version (X) eliminates any changes
that affect the later version. Only functional changes are affected by
the revision emulation feature.
3.
A correction change (e.g., VER 1.1.1) remains fixed in accordance
with the latest version. Since the revision emulation default is the
current version, program the functional version at the start of each
operation.
4.
The revision emulation feature does not affect some interface
changes for the direct operation of the modem (Configuration
Save/Recall, test mode screen in the Utility/System, all factory setup
modes, etc.).