Comtech EF Data DMD-2050E - Manual (Page 32)

DMD2050E Universal Product Modem Introduction
MN-DMD2050E Revision 2 1– 2
The DMD2050E supports a full range of Industry Standard Interfaces that include MIL-188-114
(EIA-530), EIA-613 (HSSI), and 10/100/1000 Base T Gigabit Ethernet Bridge. Additional features
defined by STANAG 4486 include Serial, Ethernet and Asynchronous overhead data
multiplexing/de-multiplexing capabilities.
The extensive list of software options allows for the deployment of a modem with today's needs
while keeping an eye toward tomorrow. Additional options and configuration (such as Monitor
and Control (M&C) Functions) can be activated in seconds via the front panel. Additional
hardware options like Turbo, Interface Expansion, and DC operation complete the modem's
dynamic feature coverage.
The DMD2050E's impressive remote accessibility surpasses all others in the field. Remote
control via Radyne's trusted RLLP (Radyne Link Level Protocol), Ethernet 10 Base-T SNMP and
Web Browser includes control of all the modem's features plus software maintenance.
Additionally, the Vacuum Fluorescent Display (VFD) can be supplemented with terminal software
running on a PC or laptop.
The modem now presents its entire monitor and control functions on the big screen. Supported
by Radyne's extensive line of redundancy switches, converters, encoders and decoders, the
DMD2050E can be built into any satellite requirement. Compatibility with current modems, such
as Radyne's DMD20, DMD50, DMD2401, DMD15, and DISA certified MIL-188-165 compliant
DMD15L are maintained for seamless substitution and addition to existing systems.
1.2 DMD2050E Configurations
The DMD2050E can be configured in the following different ways:
• features and options that are installed when the unit is ordered
• feature upgrades
• hardware options that the user can install at their own location
• options that are installed to a unit that is sent to a Comtech EF Data facility
1.2.1 Features
• Duplex modem operation
• Data rates up to 52 Mbps