Comtech EF Data DMD-2050E - Manual (Page 141)

DMD2050E Universal Satellite Modem User Interfaces
MN-DMD2050E Revision 2 4–29
4.4.6.3 TERMINAL (menu)
TYPE {VT-100, WYSE50, VIEWPOINT} Select the emulation type.
BAUD RATE {150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,
57600, 115200}
Enter the terminal baud rate.
4.4.6.4 REMOTE PORT (menu)
ADDRESS {32 - 255} Enter the Remote Port Multidrop
Address.
BAUD RATE {150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38,400,
57600, 115200}
Enter the Remote Port Baud Rate.
INTERFACE {RS-232, RS-485} Enter the Remote Port interface
type.
4.4.6.5 TCP/IP (menu)
TCP/IP MENU
BOOT MODE
{DEFAULT, NON-
VOL, BOOTP,
IP TEST} DEFAULT: During initialization (boot up), the modem will restore the
web setting to the standard IP Mask and addresses supplied by the
modem. The modem will be taken off the network and will not be
accessible. The Default settings are:
IP Address Mask: 255.000.000.000 (FF.00.00.00 hex)
Modem IP Address: 010.000.000.001 (C0.A8.00.EE hex)
Server IP Address: 010.001.001.001 (0A.01.01.01 hex)
Router IP Address: 010.000.001.001 (0A.00.01.01 hex)
BOOTP: During initialization (boot up), the modem will get the names,
masks, and IP Addresses of the modem, router, and server.
NON-VOL: Stores and uses IP Mask and addresses as provided by
the user.
IP TEST: Stores and uses IP Mask and addresses to fixed settings as
listed below.
Bootp Server Tag: 206
IP Address Mask: 255.255.255.000 (FF.FF.FF.00 hex)
Modem IP Address: 192.168.0.238 (C0.A8.00.EE)
Server IP Address: 192.168.000.101 (C0.A8.00.65)
Router IP Address: 192.168.000.102 (C0.A8.00.66)