Comtech EF Data DMD-2050E User Manual
Page 169
DMD2050E Univeral Satellite Modem
Maintenance and Troubleshooting
MN-DMD2050E Revision 2
6–7
Alarm
Description
Status
+3.3V SUPPLY
Shows the measured voltage of the +3.3 Volt power bus
inside the modem.
{Pass/Fail,
Unmasked/Masked}
+5V SUPPLY
Shows the measured voltage of the +5 Volt power bus inside
the modem.
{Pass/Fail,
Unmasked/Masked}
+12V SUPPLY
Shows the measured voltage of the +12 Volt power bus inside
the modem.
{Pass/Fail,
Unmasked/Masked}
+20V SUPPLY
Shows the measured voltage of the +20 Volt power bus inside
the modem.
{Pass/Fail,
Unmasked/Masked}
EXT CLOCK ACT
The External Clock is not active.
{Pass/Fail,
Unmasked/Masked}
EXT REF ACT
No activity exists on the External Reference.
{Pass/Fail,
Unmasked/Masked}
EXT REF LOCK
The External Reference PLL is not locked.
{Pass/Fail,
Unmasked/Masked}
ETHERNET WAN
Displays the current status of the WAN
{Pass/Fail,
Unmasked/Masked}
TRANSEC PWR TEST
Displays the results of the Power On Self Test (POST) done
by the TRANSEC module when installed.
{Pass/Fail,
Unmasked/Masked}