Comtech EF Data DMD-2050E - Manual (Page 144)

DMD2050E Universal Satellite Modem User Interfaces
MN-DMD2050E Revision 2 4–32
4.4.6.7 FTP (menu)
PORT {XXXX} Select the desired port number. Factory default is set to 21. Port 21 is a reserved port
utilized by the File Transfer Protocol for FTP control traffic.
USER ID Enter the user identification for access to an FTP session.
PASSWORD Enter the password for access to an FTP session.
4.4.6.8 WEB (menu)
WEB MENU
CONFIRMATION
{ENABLE,
DISABLE} Enable = System requires confirmation response if a
change is made to the modem output
Disable = No confirmation response is required
USER 1,
USER 2,
USER 3 ACCESS GROUP {NO GROUP,
GUEST,
OPER,
ADMIN} NO GROUP = Denies all access
GUEST = Guests can access most of the site to see
modem parameters.
OPER = Operators can monitor and control parameter
settings, and change their own authentication passwords.
ADMIN = Administrators can monitor and control the
parameters, change any user’s name and authentication
password, and modify IP network settings. ADMIN setting
gives access to the entire site.
AUTH PASSWORD {xxxxxxxx} User to select password. The user can modify the
Authorization Passwords. The user name can have up to
14 characters supporting alpha and numeric characters.
Alpha characters can be entered using the up and down
arrow keys. Numeric characters can be selected by using
the number keys on the front panel. The user can clear all
characters from the front panel screen.
USER RESET Resets group and password.