1 modulator main menu and parameters – Comtech EF Data DMD-2050E User Manual
Page 117

DMD2050E Universal Satellite Modem
User Interfaces
MN-DMD2050E Revision 2
4–5
4.4.1 MODULATOR Main Menu and Parameters
4.4.1.1
NETWORK SPEC (menu)
The NETWORK SPEC command activates a group of preset parameters. These preset
parameters help reduce keystrokes and potential compatibility problems.
NETWORK SPEC {MIL 188-165A, EBEM, IDR, IBS, DROP & INSERT, CLOSED NET, DVB}
NETWORK SPECS and data rates must be compatible. If you set data rates first, the system
allows only the applicable NETWORK SPEC. If you set the NETWORK SPEC first, the system
allows only the applicable data rates.
The following parameters are set for each NETWORK SPEC. You cannot change these
parameters while the unit is operating in the selected NETWORK SPEC mode:
NETWORK SPEC
DATA RATES
FRAMING SCRAMBLER SPECTRUM
MIL-STD 188-165A
(MILSTD-188-165A)
9.6 K – 51.848 Mbps
None
OM73
MIL 188 165ª
EBEM (EBEM)
64 K – 51.848 Mbps
EBEM
EBEM
MIL 188 165ª
IDR (IESS-308)
1.544, 2.048, 6.312, 8.448 Mbps
96 Kbps
(IDR)
V.35
Intelsat
< 1.544
1/15 (IBS) IESS-309
Intelsat
IBS (IESS-309)
< 2048
1/15 (IBS) IESS-309
Intelsat
DROP & INSERT
n x 64 n = 1, 2, 3, 4, 5, 6, 8, 10,12, 15, 16,
20, 24, 30
1/15 (IBS) IESS-309
Intelsat
DVB EN301-201 and
EN300-421
All Rates
DVB
DVB
DVB 0.25, 0.35
Closed Net
All possible combinations are allowed.
NOTE: DVB settings require the DVB NETWORK SPEC and EBEM settings require the
EBEM NETWORK SPEC.