Comtech EF Data DMD-2050E - Manual (Page 266)

DMD2050E Universal Satellite Modem Efficient Drop and Insert
MN-DMD2050E Revision 2 E–24
E.8 Prerequisite
In order for a modem to be configured for efficient Drop and Insert, the modem must have a
G.703 Interface card installed and Open Network Drop and Insert must be enabled. If you
modem does not have the required hardware and/or feature set enabled, you will need to contact
your Comtech salesperson to order the appropriate hardware and/or feature set upgrade. If your
modem has the appropriate hardware, but the software revision is prior to AY, you will need to
download the latest modem firmware from the Comtech FTP website.
The following menus illustrate how to determine whether or not your modem has the required
hardware and feature set options.
SYSTEM
HW/FW CONFIG
FIRMWARE
F05058-AY 6.1 or later required
SYSTEM
HW/FW CONFIG
TERR INTFC BRD
01-AS/4975 or PLR5660 or equivalent required
SYSTEM
HW/FW CONFIG
FEATURES
UPGRADE LIST
D&I
INSTALLED required
ENH ASYNC
INSTALLED optional, required if desired
AUPC
INSTALLED optional, required if desired