Comtech EF Data DMD-2050E - Manual (Page 287)

DMD2050E Universal Satellite Modem Ethernet Data Interface Setup
MN-DMD2050E Revision 2 H–5
H.1.6 Packet Statistics
The following statistics are available under the Monitor Menu when the Ethernet Data Interface is
selected.
Total Packets This Counter displays the total number of Ethernet packets received from the
satellite.
Error Packets This counter displays the total number of Ethernet packets received from the
satellite that had errors.
Packet Error Rate This displays the Ethernet Packet Error Rate (PER) from the satellite.
Packet Statistics Reset Allows the user to reset the Ethernet Total Packets and Ethernet Error Count
by pressing .
Link Status The following status is available under the Monitor Menu/Link Status Sub-
Menu when the Ethernet Data Interface is selected
Port 1 Status Displays the current status of LAN Port 1.
Port 2 Status Displays the current status of LAN Port 2.
Port 3 Status Displays the current status of LAN Port 3.
WAN Status Displays the current status of the WAN Port.
For each of the above-listed ports, the status may take on one of the following values/meanings.
Down The link is down.
Unresolved Unable to agree on connection speed.
10 Mbps Half Connected at 10 Base-T Half Duplex.
10 Mbps Full Connected at 10 Base-T Full Duplex.
100 Mbps Half Connected at 100 Base-T Half Duplex.
100 Mbps Full Connected at 100 Base-T Full Duplex.
If all four LAN Ports are down, a Tx Data Activity Minor Alarm will be generated.
If the WAN Port is down, ax and Rx Ethernet WAN Major Alarm will be generated.