3 parameter setup, 1 select a parameter, 2 enter and save a new parameter – Comtech EF Data DMD-2050E User Manual
Page 116: 3 change a new parameter before saving, 4 front panel main menus, 3 parameter setup 4.3.1 select a parameter
DMD2050E Universal Satellite Modem
User Interfaces
MN-DMD2050E Revision 2
4–4
4.3 Parameter Setup
4.3.1 Select a Parameter
Use the arrow keys to move through the menus. To select a parameter, press ENTER. The first
space of the parameter flashes to show it is selected.
Figure 4-2. Enter New Parameters
4.3.2 Enter and Save a New Parameter
Use the numeric keys to enter new data into the parameter.
Press ENTER to save the new data.
4.3.3 Change a New Parameter Before Saving
To make changes before you press ENTER, press CLEAR. After you press CLEAR, the display
shows the original parameter without any changes. Press ENTER, then enter the new data, and
press ENTER once again to save the new data.
4.4 Front Panel Main Menus
The Front Panel control screens are organized into several Main Menus.
•
Modulator
•
Demodulator
•
Interface
•
Monitor
•
Alarms
•
System
•
Test
Main menus have parameters and submenus. Arrows on the VFD show which arrow keys to use
to move through the parameters and submenus.