Comtech EF Data DMD-2050E - Manual (Page 124)

DMD2050E Universal Satellite Modem User Interfaces
MN-DMD2050E Revision 2 4–12
LOCAL AUPC MENU
TARGET Eb/No
{4.0 to 16 dB} Set the desired E
b
/N
o
for the local receiver.
RADYNE AUPC: When configured for Radyne AUPC, this
setting is compared against the remote E
b
/N
o
and commands
to the local modem to increase or decrease the local transmit
power.
EF AUPC: When configured for EF AUPC, this setting is
compared against the local received E
b
/N
o
and commands to
the remote modem to increase or decrease transmit power.
NEARSIDE: When configured for NEARSIDE AUPC, this
setting is compared against the received E
b
/N
o
of the local
modem and commands to the local modem to increase or
decrease transmit power.
TARGET Es/No {1.0 to 25 dB} Set the desired E
s
/N
o
for the local receiver.
EBEM AUPC: When configured for EBEM AUPC, this setting
is compared against the remote E
s
/N
o
and commands to the
local modem to increase or decrease the local transmit
power.
TRACKING RATE {0.5 to 6.0} Set the rate at which the commands to increase or decrease
Transmit Power are sent. Each command will result in a 0.5
dB increase or decrease in Transmit Power from the remote
transmitter. The tracking rate is adjustable from 0.5 dB per
minute to 6.0 dB per minute in 0.5 dB steps. (Only available
when EFAUPC is selected as the framing)
LOCAL CL ACTION {HOLD, NOMINAL,
MAXIMUM} Set the Remote Transmit Power Setting to be used when the
local modem receiver loses lock. The setting can be 'HOLD'
(no action taken), 'NOMINAL' (the nominal Transmit Power
Setting is used), and 'MAXIMUM' (the maximum Transmit
Power Setting is used). (Only available when EFAUPC is
selected as the framing)
REMOTE CL ACTION {HOLD, NOMINAL,
MAXIMUM} Set the Local Transmit Power Setting to be used when the
remote modem receiver loses lock. The setting can be
'HOLD' (no action taken), 'NOMINAL' (the nominal Transmit
Power Setting is used), and 'MAXIMUM' (the maximum
Transmit Power Setting is used).