AMETEK MX CTSL - Manual (Page 74)

User Manual
California Instruments
5.7 Main Harmonics Test Window
Upon closing the Main setup window,
and test results are displayed in real-time.
function of which are explained in the
Field / Control Location
Start button Upper left
corner
MX-CTSL
Revision J
Window Operation
Figure 5-5: Harmonics Test Window
the harmonics test window will appear. Tests are
time. This main harmonics test window has a limited
table below.
Description
Starts harmonics test using presently selected parameters.
is running, parameters cannot be changed. Starting a
data to be written to the test data file if data recorded
time a test is run, a new sequential 'Test Number' is assigned.
for each test are automatically logged. Data for each
recorded if this option is selected in the Additional Setup
Once a test is running, the Start button changes to a
any menus will be disabled while a test is in progress
menu under Windows will cause the application to halt
result in data loss.
CTSL Compliance Test System
74
are executed from this window
limited number of controls, the
parameters. Once a test
a test also causes
recorded is enabled. Each
assigned. Results
each test is only
Setup screen.
a Stop button. Also,
progress as pulling down a
halt which would