AMETEK MX CTSL - Manual (Page 142)

User Manual MX-CTSL Compliance Test System
Field Description
No CI power
source Select this option if you are not using a CI AC Source or have no OMNI
impedance.
External OMNI
Select this option if you have an OMNI-3-75 connected to the MX through
the system interface cable.
Also select this option if you have an OMNI-3-37MX controlled from the
front panel.
CI Source with
programmable
impedance
Select this option if the programmable impedance of the MX30-3Pi or
MX45-3Pi is used in addition to external reference impedance. In this
mode, the external OMNI has to be engaged either manually or through the
MX front panel.
Original
Calibration
Information
Shows original calibration date of CTS system.
Calibration Data
Update
Information
Shows the last date the system calibration data was changed and by
whom.
California Instruments Revision H 139