AMETEK MX CTSL - Manual (Page 136)

User Manual MX-CTSL Compliance Test System
15.3 PACS-3-75 General Specifications
The PACS-3-75 unit creates the mechanical and electrical interface between the AC source, the
EUT and the PC. It provides the necessary isolation and signal conditioning to perform the
measurements needed.
PACS Model: PACS-3-75
Number of phases 3
Channels Voltage and Current 6
Connector Style Front panel none
Rear panel terminal block
Maximum Voltage L- L 540 Vac
L – N 312 Vac
Maximum Current Front panel 75A rms/phase
Input Voltage Rear panel IEC320 115V / 230V Nominal
±
10%
Input Frequency 50 / 60Hz
Input Current less than 0.6A (115v)
less than 0.3A (230v)
Dimensions HxWxD (inch) 3.5 x 16.8 x 22
HxWxD (mm). 89 x 427 x 560
Weight Lbs / kg. 12 / 5.4
Voltage Range: The input voltage range is 0 to 312V rms L-N.
The 1-phase or 3-phase voltage is applied to input terminal block TB4.
Current Range: The max. input current is 75 A rms.
Frequency may not be 50Hz depending on power source used and application.
California Instruments Revision H 133