Adept Lynx Platform - Manual (Page 95)

Adept Lynx Platform User's Guide, Rev B
Page 95 of 116
Chapter 8: Maintenance
3. Install the new roller and bearing, using the retained shoulder bolt.
Roller
Fuse
Figure 8-9. Docking Station Roller and Fuse Locations
Docking Station AC Power Fuse
The only user-serviceable fuses are in the docking station. The two external AC fuses are loc-
ated between the power switch and the AC power plug.
Symptoms: When the docking station is switched on, the blue power light does not come on.
(Verify that the unit is plugged into AC power.)
WARNING: Unplug power from the docking station before starting.
Remove the power cord at the charger.