Adept Lynx Platform - Manual (Page 14)

Adept Lynx Platform User's Guide, Rev B
Page 14 of 116
Chapter 1: Introduction
1.4 Safety Precautions
Read the installation and operation instructions, as well as the Adept Robot Safety Guide , before
using the equipment.
l
Do not ride on the Lynx platform.
l
Do not exceed the maximum weight limit.
l
Limit operation to a 1:12 slope.
l
Do not drop the platform, run it off a ledge, or otherwise operate it in an irresponsible
manner.
l
Do not get the platform wet. Do not expose the platform to rain or moisture.
l
Do not use power extension cords with the docking station unless properly rated.
l
Do not continue to run the platform after hair, yarn, string, or any other items have
become wound around the platform’s axles or wheels.
l
Never access the interior of the platform with the charger attached.
Immediately disconnect the battery after opening the battery compartment door.
l
Do not use parts not authorized by Adept.
l
Do not use any charger not supplied by Adept.
1.5 What to Do in an Emergency
Press the E-Stop button (a red push-button on a yellow background/field) and then follow the
internal procedures of your company or organization for an emergency situation. If a fire
occurs, use a type D extinguisher: foam, dry chemical, or CO
2
.
1.6 Additional Safety Information
Adept provides other sources for more safety information:
Manufacturer's Declaration of Conformity (MDOC)
This lists all standards with which the Lynx platform complies. See Manufacturer's Declar-
ation on page 15.
Adept Robot Safety Guide
The Adept Robot Safety Guide provides detailed information on safety for Adept robots. It also
gives resources for more information on relevant standards.
It ships with each robot, and is also available from the Adept Document Library. Refer to
Adept Document Library on page 16.