Adept Lynx Platform - Manual (Page 70)

Adept Lynx Platform User's Guide, Rev B
Page 70 of 116
Chapter 6: Operation
Figure 6-2. Docking Station
Indicators, Controls, and Connections
The docking station has a power switch and two LEDs:
l
blue indicates that power is available.
l
yellow indicates that a charge is in progress.
The power plug for AC supply is on the right side of the station, as viewed from the front.
Power requirements are 100 - 240 VAC, 50 - 60 Hz, and 8 A.
The plug for connecting the manual charging cable is on the left side of the station, as viewed
from the front.