Adept Lynx Platform - Manual (Page 20)

Adept Lynx Platform User's Guide, Rev B
Page 20 of 116
Chapter 2: Setup
2.3 Unpacking
Before signing the carrier’s delivery sheet, compare the actual items received (not just the pack-
ing slip) with your equipment purchase order. Verify that all items are present and that the
shipment is correct and free of visible damage.
l
If the items received do not match the packing slip, or are damaged, do not sign the
receipt.
l
If the items received do not match your order, please contact Adept immediately.
Retain the crates and packaging materials. These items may be necessary to settle claims or, at
a later date, to relocate the equipment.
The Adept Lynx platform comes packed in a wooden crate, lined with foam. It is mounted on
a pallet, with a wooden cover. See the following two figures.
The docking station, joystick, and platform are shipped in the same crate. The joystick is in the
smaller compartment on the near side in the previous figure.
The battery is shipped in a separate crate.
1. Remove the lag screws that attach the crate cover to the pallet.
2. Lift off the crate cover to reveal the crate, pallet, and contents.
3. Remove the two wing nuts and washers holding the back panel of the crate to the crate.
Retain the two wing nuts and washers for reassembly.
4. Remove the back panel.
Retain the back panel.
5. Remove the docking station.
6. Remove the tie-downs (not shown here) that hold the platform in place.
Figure 2-1. Side View of Docking Station and Platform in Crate