Xtramus APMPT-4 V2.4 User Manual
Page 94
94
E-mail: [email protected]
Website: www. Xtramus.com
XTRAMUS TECHNOLOGIES
®
B. Transmit
Frame Length Setting: As shown in the figure down below, in a standard Ethernet II frame, the
Frame Length can be from 64~1518 bytes.
By clicking the Frame Length scroll-down menu, you can set the frame length to random (frame
length will be randomly assigned from 64~1518 bytes) or fixed (frame length will be a fixed
number). If you choose fixed as your Frame Length, you can set the frame length in the field
down below.
Packet Setting: You can set how packets will be transmitted in this field.
Total Packet Count: The total amount of packets that will be transmitted for this test.
TxPkt Timeout: If the system fails to send the test packet within the time you set here, the
packet will be drop.
Tx Payload: You can set the content of the transmitting packets with the Payload
scroll-down menu.
T/L（0X）
：You can set the T/L (0X) after MAC address in this field.
Packet Gap Setting: You can set the gaps between packets in this field.
Frame Gap: Duration time between frames. Increasing Frame Gap reduces the fail rate, while
96 bit-time is wirespeed.