Xtramus APMPT-4 V2.4 - Manual (Page 11)

11
E-mail: [email protected]
Website: www. Xtramus.com
XTRAMUS TECHNOLOGIES ®
1.3.4. PoE (Power over Ethernet) Test
Overview of PoE

PoE: Power Over Ethernet
 Based on IEEE 802.3af and ongoing 802.3at
 Protocol for DTE power via copper-based media
 DTE (Data Terminal Equipment)

PSE: Power Sourcing Equipment
Equipment provides the power to PD by network cable.
 PD: Powered Device
Device consumes the power from PSE by network cable. NuStream-2000i, 600i with PoE module
acts as PD for the test.
A. PoE-Connect
Perform connect test on DUT (i.e. PSE) based on different configurations.
B. PoE-Disconnect
Perform disconnect test on DUT (i.e. PSE) based on different configurations.
C. PoE-Overload
Perform overload test on DUT (i.e. PSE) based on different configurations.
D. PoE-ShortCircuit
Perform short circuit test on DUT (i.e. PSE) based on different configurations.
E. PoE-Loading
Perform loading and transmitting packets test on DUT (i.e. PSE) based on different configurations.
F. PoE-Loading-GROUPS
Perform loading and transmitting packets test on DUT (i.e. PSE) based on different configurations and
criteria for two groups with different media types such as 100Mbps and 1Gbps
G. POE-Dynamic Loading
Perform multiple loading and transmitting packets test on DUT (i.e. PSE) in different configurations at the
same time.