Xtramus APMPT-4 V2.4 - Manual (Page 106)

106
E-mail: [email protected]
Website: www. Xtramus.com
XTRAMUS TECHNOLOGIES ®
 Wait after Setup: You can set the waiting time for the system to halt after finishing configuring.
 Add a Hotkey: You can indicate a command as hotkey for script between Ctrl+A to Ctrl+Z.
 Enable Terminal Log: You can choose whether to print the contents transmitted by the COM or
Telnet into the executing log by tests.

Third party Client: You can check this function to make the third party software as the visual
interaction window. APMPT4 will function as an transfer station (virtual Telnet server), which will
feedback the communication details between COM or Telnet and DUT to the third party software
interfaces via Telnet protocols , receive the manual input commands by the third party users via
Telnet and forward the commands to the DUT via Telnet or COM.
 Wait Client Disconnected: When checking this function, the user can interact with the DUT after
executing the scripts by manually inputting commands before closing the window and exiting the
task. Or the task will be exited directly after executing the scripts.
 Keyword setup: This table shows information regarding to the scripts.
 Key Word Case Sensitive: Decide whether the script is case sensitive.
 Halt on if Fail: Decide whether to ignore other tasks and exit the task when error happens.

Enable Wildcard (‘?‟,‟*‟): Decide whether to support wildcard.
5.6.2. Telnet
Setup
 Telnet Setting: This function provides IP settings for the DUT to normally communicate with the DUT.
There are two modes: Via Network Interface Card and Via NuStream Port.
 Via Network Interface Card: Under this mode, the NIC of the host running APMPT4 will connect