Xtramus APMPT-4 V2.4 - Manual (Page 63)

63
E-mail: [email protected]
Website: www. Xtramus.com
XTRAMUS TECHNOLOGIES ®
5.2.4. Learning
 Enable Learning: As shown in the figures down below, enabling this function allows learning
packets transmitted to the DUT before test packets are transmitted. If you disable this function, no
learning packets will be transmitted.

Broadcast: Select the learning packet mode for Broadcast.

Unicast: Select the learning packet mode for Unicast.

The Same with Testing Packets: the learning packet mode is the same with that of the Testing
Packets.
 Frame Count: Repeat frame count per learning packets burst.
 Frame Gap: Duration time between learning frames.
 Tx Pkt Timeout: If the system fails to send the learning packet within the time you set in TxPKT
Timeout field, the packet will be drop.

Tx Mode: You can change how learning packet will be transmitted. By clicking the Tx scroll-down
menu, you can choose Sync Mode, Group Mode (transmitting gap can be set in the Gap field
located down below), and Sequence Mode.
 Delay Time After Learning: The time gap between after learning and the next process.