Xtramus APMPT-4 V2.4 - Manual (Page 35)

35
E-mail: [email protected]
Website: www. Xtramus.com
XTRAMUS TECHNOLOGIES ®
4. Creating Task via New Model Wizard
When performing tests on your DUT with APMPT-4 for the first time, you have to create a new set of test
settings for the DUT.
Before starting to create a new task via New Model Wizard, please be sure that:

All module cards (such as XM-RM751, XM-RM761, or XM-RM781) are installed on chassis (such as
NuStreams-2000i/600i) properly.

The chassis (such as NuStreams-2000i/600i) is powered- on and is connected to a PC according to “2.2.
Hardware Installation
”.
To start using New Model Wizard, please click File on the Menu Bar, and choose New Model Wizard as
shown in the figure down below.
A “New Model Wizard – Active Ports for Selection!” window will pop up. All module cards that are
installed on the chassis will be displayed here.
Please refer to the sections down below and start creating test tasks for your DUT.