Xtramus APMPT-4 V2.4 User Manual
Page 75
75
E-mail: [email protected]
Website: www. Xtramus.com
XTRAMUS TECHNOLOGIES
®
B. Criteria
Task
Description
PoE-Connect
I Class: Configure minimum and maximum mA
current of the configured class that is described at
previous tab
Tpdc: Configure the minimum and maximum
values in milliseconds to classify the PD (Powered
Device)
Power meter Setting: this function is available only when XM-2WL1 modules are installed. The
function is to test the electric parameters of DUT. Please select the XM-2WL1 module from the
scroll-down menu.
Pow
er Setting: This function allows you to check DUT‟s power status during the test. Please note
that if there is no power testing module card installed on the chassis, the Power Setting section will
be gray and thus unable to access.
Enable Power Monitor & Check: Click this check-box to enable Power Setting function. You
can set which port on the power testing module card to use by clicking the scroll-down menu.
RMS Voltage/Current, Peak Voltage/Current, and Active Power: You can set the criteria for
power testing in these fields.
C. Help
You can see the system status of your
task on this field.