Hardware installation – Xtramus APMPT-4 V2.4 User Manual

Page 18

Website: www. Xtramus.com

XTRAMUS TECHNOLOGIES

2.2. Hardware Installation

Before running APMPT-4 after installation, please

be sure that you‟ve installed both the DUT and your PC

with Nustreams-2000i/600i properly as shown in the illustrations down below.

For operating APMPT-4 on NuStreams-2000i and NuStreams-600i Chassis, an external PC is required.

For NuStreams-2000i, connect network port of PC LAN card to DOWN (or UP) port of XM-2S19 with

network cable.

For NuStreams-600i, connect network port of PC LAN card to DOWN (or UP) port of XM-2S10 with

network cable.

Please note that the

PC‟s TCP/IP setting should be configured so that the PC‟s NIC will obtain an IP

address from NuStreams-2000i/600i automatically.