Xtramus APMPT-4 V2.4 - Manual (Page 12)

12
E-mail: [email protected]
Website: www. Xtramus.com
XTRAMUS TECHNOLOGIES ®
1.3.5. AC Test
A. PWR-Setup
Perform power control on DUT such as power ON control and cycle reboot through test module XM-2WL1.
Under the control of XM-2WL1 module on chassis, the DUT that use the power from XM-2WL1 can have
ON / OFF and reboot control.
B. PWR-Check
Perform power monitor and statistics measurement from power plug into test module XM-2WL1. The outlet
of XM-2WL1 also supply power to DUT, thus operator gets the power statistics measurement to DUT.
1.3.6. Terminal Test
This test includes two parts: Console and Telnet test. Perform test by executing commands by manual
script or script file to RS232 interface or Telnet Server of DUT.
A. Console
Console refers to the console port, COM port or RS232 interface. This test will perform a series of standard
terminal command to check the response of COM port.
B. Telnet
Perform test by executing commands by manual script file to Telnet Server of DUT.
1.3.7. General Test
Tests listed in this category include: 1 to Many-UC, 1 to Many-MCV,CALL-EXT, Inserting Waiting Time,
Media Pre-setting ,Toggle MDI-II/X and Line Emulate .
A. 1 to Many-UC
1 to Many-UC is a Unicast Full Performance Test. Performing Layer 2 MAC address Unicast performance
tests from one source to multiple ports with different media types (such as 100Mbps and 1Gbps Full).