Xtramus APMPT-4 V2.4 User Manual

Page 21

Website: www. Xtramus.com

XTRAMUS TECHNOLOGIES

Please follow the steps down below to start APMPT-4:

When starting APMPT-

4, a “Connect to NuServer”

window will pop up and asked how you are going to

connect to NuServer.



Local Host:

Choose this option when you‟re

running APMPT-4 from NuStreams-2000i IPC

module

or a PC that‟s connected to

NuStreams-2000i/600i via an RJ45 cable.



Remote:

Choose this option when you‟re running

APMPT-4 from other PC located on the network.

Choose the IP address which is assigned from

NuStreams-2000i/600i from the scroll-down menu。



Demo: Choose demo to enter APMPT-

4‟s Demo

Mode.



Connect/Cancel: Click the Connect button to

connect to NuStreams-2000i/600i or click the

Cancel button to quit.

If NuServer is not running while starting APMPT-4, a

window will pop up and ask if you would like to run

NuServer. Please click Yes to continue or No to cancel.

A “NuServer-NIC Information” window will pop up. Please select the NIC (Network Interface Card) which is

connected to NuStreams -2000i/ 600i from the Network Interface Information t

able, and click OK. If you‟re

using NuStreams-

2000i‟s IPC module, please choose “Realtek RTL8139 Family Fast Ethernet”. NuServer

will connect to the daughter boards, and APMPT-4 will start as well.