Xtramus APMPT-4 V2.4 - Manual (Page 105)

105
E-mail: [email protected]
Website: www. Xtramus.com
XTRAMUS TECHNOLOGIES ®
5.6. Test Task – Terminal
This task contains two subtasks: Console and Telnet. For more detail description regarding to this task ,
please refer to “1.3.6. Terminal Test”.
5.6.1. Console
Setup
 Console Setting: This table shows information regarding to the testing serial port.
 Port: COM port of the IPC or the PC that control the chassis
 Baud Rate: Transmission speed.
 Data Bits: Data length of a segment.
 Stop Bits: Stop bits of a segment
 Parity: The method to check the correctness
 Flow: Set the type of flow control based on Xon/Xoff, Hardware or None.
 Default: Click Default to set all values to default.
 Script Setup: To execute scripts for serial port tests, you can choose to Run Script File, or Run
Script.
 Run Script File: Click Load File to load a text file (*.txt) on your PC.
 Run Script: You can edit/input a script with console commands in the field down below. Click <
Add Waiting to add a waiting command to the edit area. You can set the amount of seconds for
the waiting command in the field down below. To clear all texts in the edit area, click Clear.