Xtramus APMPT-4 V2.4 - Manual (Page 92)

92
E-mail: [email protected]
Website: www. Xtramus.com
XTRAMUS TECHNOLOGIES ®
5.4.6. POE Loading-GROUPS
A. Setup
The table showed in the Setup tab menu contains:
 Port: The Active Port that is used for the PoE test.
 Module: The module card that is used for the PoE test.

Class: You can select the power class for the DUT here. The power class available for APMPT-4 is
listed in the table down below.
Class Power range (Watt)
0 0.44 to 12.95
1 0.44 to 3.84
2 3.84 to 6.49
3 6.49 to 12.95
4
802.3af: Reserved
802.3at：≥12.95