Altera Quartus II Scripting - Manual (Page 80)

2–54 Chapter 2: Command-line Executables
quartus_pow
Quartus II Scripting Reference Manual © July 2013 Altera Corporation
quartus_pow
The Quartus II PowerPlay Power Analyzer estimates the thermal dynamic power and the thermal static
power consumed by the design. For newer families such as Stratix II and MAX II, the current drawn
from each power supply is also estimated.
Quartus II Analysis & Synthesis and the Fitter must be run successfully before running the PowerPlay
Power Analyzer.
Usage
quartus_pow [-h | --help[=] | -v]
quartus_pow []
This command supports the following options:
Option Page
-c= ............................................................................................................................... 2–96
-f=................................................................................................................................. 2–92
-h............................................................................................................................................................... 2–92
-v ............................................................................................................................................................... 2–92
--64bit ....................................................................................................................................................... 2–92
--default_input_io_toggle_rate=........................................................................ 2–55
--default_toggle_rate=......................................................................................... 2–55
--estimate_power[=on|off]................................................................................................................... 2–55
--help[=] ....................................................................................................................... 2–93
--input_saf[=]............................................................................................................. 2–55
--input_vcd[=].......................................................................................................... 2–56
--lower_priority ...................................................................................................................................... 2–93
--no_input_file ........................................................................................................................................ 2–56
--output_epe=............................................................................................................ 2–56
--output_saf=............................................................................................................. 2–56
--read_settings_files[=on|off] .............................................................................................................. 2–98
--rev=.......................................................................................................................... 2–96
--set= ................................................................................................................... 2–96
--use_vectorless_estimation[=on|off]................................................................................................. 2–56
--vcd_filter_glitches[=on|off] .............................................................................................................. 2–57
--version................................................................................................................................................... 2–93
--voltage=.................................................................................................................... 2–57
--write_settings_files[=on|off]........................................................................................................... 2–100
This command includes help on the following topics:
Help Topic Page
arguments ............................................................................................................................................... 2–93
makefiles.................................................................................................................................................. 2–93
return_codes ........................................................................................................................................... 2–95