Altera Quartus II Scripting - Manual (Page 196)

3–66 Chapter 3: Tcl Packages & Commands
chip_planner
Quartus II Scripting Reference Manual © July 2013 Altera Corporation
make_ape_connection
Usage
make_ape_connection [-delay_chain_index ] [-dst_node ]
[-gen_id ] [-gnd] [-literal_index ] -port_type
[-src_gen_id ] [-src_node ] [-src_port ] [-vcc]
Options
-delay_chain_index : Used for Connections from pins through the
PAD_TO_CORE delay chain. -2 = bypass, -1 = don't care, 0,1 = specific index
-dst_node : Destination node ID
-gen_id : Destination node generic ID
-gnd: Option to connect to GND
-literal_index : Literal index of new input port
-port_type : Type of new input port
-src_gen_id : Source port generic ID
-src_node : Source node ID
-src_port : Source port ID
-vcc: Option to connect to VCC
Description
Makes a netlist connection between the source and destination ports.
Returns 1, if a netlist connection is made between the two ports. Returns 0, otherwise.
Example
make_ape_connection -src_node 0 -src_port 0 -dst_node 3 -port_type DATAC