Altera Quartus II Scripting - Manual (Page 373)

Chapter 3: Tcl Packages & Commands 3–243
project
© July 2013 Altera Corporation Quartus II Scripting Reference Manual
set_power_file_assignment
Usage
set_power_file_assignment [-remove] [-saf_file ] [-section_id ]
[-to ] [-vcd_end_time ] [-vcd_file ] [-vcd_start_time
]
Options
-remove: Option to remove assignment
-saf_file : SAF file name
-section_id : Section id
-to : Entity to which to apply power input file
-vcd_end_time : End time for VCD file parsing
-vcd_file : VCD file name
-vcd_start_time : Start time for VCD file parsing
Description
Sets or removes a power input file assignment. Power input file assignments are specified using multiple
global assignments, and a single instance assignment as illustrated in the following example:
set_global_assignment -name POWER_INPUT_FILE_NAME "test.vcd" -section_id test.vcd
set_global_assignment -name POWER_INPUT_FILE_TYPE VCD -section_id test.vcd
set_global_assignment -name POWER_VCD_FILE_START_TIME "10 ns" -section_id test.vcd
set_global_assignment -name POWER_VCD_FILE_END_TIME "1000 ns" -section_id test.vcd
set_instance_assignment -name POWER_READ_INPUT_FILE test.vcd -to test_design
The power input file assignment serves as a wrapper for all of the above assignments. If the "-remove"
setting is not set, the set_power_file_assignment will also make the following assignment to enable the use
of input files:
set_global_assignment -name POWER_USE_INPUT_FILES ON
If you do not specify a "-section_id", a new section identifier is created for the input file assignment. If a
"-section_id" is specified and it does not already exist, it is used as the new section identifier. If a
"-section_id" is specified and it does exist, the existing input file assignments are removed and a new input
file assignment is created using the given parameters and section identifier.
If an entity name given by "-to" is not specified, the input file assignment applys to the top level design
entity.
If the "-remove" setting is used, the input file assignment given by the "-section_id", "-vcd_file", or
"-saf_file" is removed from the project.
Assignments created or modified by using this Tcl command are saved to the Quartus II Settings File (.qsf).
Example
## Specify an input SAF file applied to the top level entity
## A default section will be created
set_power_file_assignment -saf_file test.saf
## Specify an input VCD file applied to design_top|counter1
## Use the given section_id to create a new section
set_power_file_assignment -vcd_file test.vcd -to design_top|counter1 \
-section_id test.vcd
## Update the previous input VCD file assignment to specify a
## start and end time