Altera Quartus II Scripting - Manual (Page 476)

3–346 Chapter 3: Tcl Packages & Commands
simulator
Quartus II Scripting Reference Manual © July 2013 Altera Corporation
compare_vector
Usage
compare_vector [-all_signals ] [-begin ] [-compare_clocks
] [-compare_rule_value_0
<0,1,X,L,H,W,Z,U and/or DC>] [-compare_rule_value_1 <0,1,X,L,H,W,Z,U and/or DC>]
[-compare_rule_value_dc <0,1,X,L,H,W,Z,U and/or DC>] [-compare_rule_value_h
<0,1,X,L,H,W,Z,U and/or DC>] [-compare_rule_value_l <0,1,X,L,H,W,Z,U and/or DC>]
[-compare_rule_value_u <0,1,X,L,H,W,Z,U and/or DC>] [-compare_rule_value_w
<0,1,X,L,H,W,Z,U and/or DC>] [-compare_rule_value_x <0,1,X,L,H,W,Z,U and/or DC>]
[-compare_rule_value_z <0,1,X,L,H,W,Z,U and/or DC>] [-default_tolerance unit>] [-end ] [-expected ] [-file name>] [-max_mismatches ] [-signals | <>, ON | OFF>] [-trigger_mode ]
Options
-all_signals : Option to compare or not compare all signals
-begin : Start time of waveform comparison
-compare_clocks : List of comparison
clock signals to be used to trigger waveform comparison, their clock period, offset, and
duty cycle settings and waveform comparison trigger settings
-compare_rule_value_0 <0,1,X,L,H,W,Z,U and/or DC>: Option to specify the waveform
comparison rule setting for signal value 0. Example: "0,L,DC"
-compare_rule_value_1 <0,1,X,L,H,W,Z,U and/or DC>: Option to specify the waveform
comparison rule setting for signal value 1. Example: "1,H,DC"
-compare_rule_value_dc <0,1,X,L,H,W,Z,U and/or DC>: Option to specify the waveform
comparison rule setting for signal value DC. Example: "0,1,X,L,H,W,Z,U,DC"
-compare_rule_value_h <0,1,X,L,H,W,Z,U and/or DC>: Option to specify the waveform
comparison rule setting for signal value H. Example: "1,H,DC"
-compare_rule_value_l <0,1,X,L,H,W,Z,U and/or DC>: Option to specify the waveform
comparison rule setting for signal value L. Example: "0,L,DC"
-compare_rule_value_u <0,1,X,L,H,W,Z,U and/or DC>: Option to specify the waveform
comparison rule setting for signal value U. Example: "X,W,Z,U,DC"
-compare_rule_value_w <0,1,X,L,H,W,Z,U and/or DC>: Option to specify the waveform
comparison rule setting for signal value W. Example: "X,W,U,DC"
-compare_rule_value_x <0,1,X,L,H,W,Z,U and/or DC>: Option to specify the waveform
comparison rule setting for signal value X. Example: "X,W,U,DC"
-compare_rule_value_z <0,1,X,L,H,W,Z,U and/or DC>: Option to specify the waveform
comparison rule setting for signal value Z. Example: "Z,U,DC"
-default_tolerance : Default comparison timing tolerance for all
signals
-end : End time of waveform comparison
-expected : File name of the expected vector file
-file : File name of the current vector file
-max_mismatches : Maximum mismatches reported in a waveform comparison
-signals >, ON | OFF>: List of signals to
be compared/not compared, their tolerance settings, and waveform comparison trigger
settings
-trigger_mode : Waveform comparison trigger
mode--trigger comparison based on transition edges of all input signals only, all
signals, or specified signals only