Altera Quartus II Scripting - Manual (Page 115)

Chapter 2: Command-line Executables 2–89
quartus_tan
© July 2013 Altera Corporation Quartus II Scripting Reference Manual
--do_min_analysis[=on|off]
Option to perform a minimum timing analysis.
The Timing Analyzer performs only the following analyses:
■ clock hold
■ tsu
■ th
■ minimum tpd
■ minimum tco
--dump_atom_generated_clocks
Generate file with the clocks, generated by Timing Analyzer from ATOMs, in the TCL format.
--fast_model[=on|off]
Option to run Timing Analyzer (Fast Timing Model) using minimum delays. This option turns on the
"--do_min_analysis" option, which forces the Timing Analyzer to perform only the following analyses:
■ clock hold
■ tsu
■ th
■ minimum tpd
■ minimum tco
--fmax=
Option to specify global fmax requirement.
--post_map
Option to run the Timing Analyzer (quartus_tan) based on the results from Analysis & Synthesis
(quartus_map).
The estimated timing delays are primitive results, which are not as accurate as the results obtained by
running the Timing Analyzer based on results from the Fitter (quartus_fit).
Example
quartus_map top
quartus_tan top --post_map
--speed=
Option to specify the device speed grade for running Timing Analysis.
This option specifies the actual speed grade used by the delay annotator.