Altera Quartus II Scripting - Manual (Page 295)

Chapter 3: Tcl Packages & Commands 3–165
logic_analyzer_interface
© July 2013 Altera Corporation Quartus II Scripting Reference Manual
tristate_output_pin
Usage
tristate_output_pin -instance_name
Options
-instance_name : Name of the Logic Analyzer Interface instance to change
Description
Tristate the output pins of the specified Logic Analyzer Interface instance.
Example
# Start a new control sequence.
begin_logic_analyzer_interface_control -hardware_name "USB-Blaster \
\[USB-0\]" -device_name "@1: EP1C20 (0x020840DD)" -file_path \
"lai_demo.lai"
# Query the output pin state.
puts "Current output pin state of instance auto_lai_0:"
puts [get_current_state_of_output_pin -instance_name "auto_lai_0"]
# Change input bank source to the output pins
change_bank_to_output_pin -instance_name "auto_lai_0" -bank_name "Bank 1"
# Query the output pin state.
puts "Current output pin state of instance auto_lai_0:"
puts [get_current_state_of_output_pin -instance_name "auto_lai_0"]
# Change input bank source to the output pins
change_bank_to_output_pin -instance_name "auto_lai_0" -bank_index 0
# Query the output pin state.
puts "Current output pin state of instance auto_lai_0:"
puts [get_current_state_of_output_pin -instance_name "auto_lai_0"]
# Tristate the output pins
tristate_output_pin -instance_name "auto_lai_0"
# Query the output pin state.
puts "Current output pin state of instance auto_lai_0:"
puts [get_current_state_of_output_pin -instance_name "auto_lai_0"]
# End the control sequence.
end_logic_analyzer_interface_control