Altera Quartus II Scripting - Manual (Page 44)

2–18 Chapter 2: Command-line Executables
quartus_cpf
Quartus II Scripting Reference Manual © July 2013 Altera Corporation
-q=
Refer to the help for --frequency= on page 2–19
-s=
Refer to the help for --sfl_device= on page 2–20
-u=
Refer to the help for --count_dir= on page 2–18
-w
Refer to the help for --write on page 2–20
--configuration_mode=
Option to specify the configuration mode to be used. Use this option only if you want to generate a Raw
Binary File (.rbf), Tabular Text File (.ttf) or a Hexadecimal (Intel-Format) Output File (.hexout).
--convert
Option to convert input file(s) to output file format.
# To convert a .sof into a .pof, .jic, .rbf, .ttf or .hexout
quartus_cpf -c [options or option_file] rbf | ttf | hexout)>
# To convert multiple files into a .pof, .jic, .rbf, .ttf, or .hexout,
# use a Conversion Setup File (.cof) created with the
# Convert Programming Files dialog box in the UI
quartus_cpf -c
# To convert multiple filesinto a .jam, .jbc, .svf or .isc,
# use a Chain Description File (.cdf) created with the
# Programmer tool in the UI
quartus_cpf -c
--count_dir=
Option to specify the direction for the address for the Hexadecimal (Intel-Format) Output File (.hexout).
Use this option only with the "-h" or "--hexout" option.
--device=
Option to specify the name for the configuration device.
Value Options
PS Passive Serial
AP Active Parallel
FPP Fast Passive Parallel
PPA Passive Parallel Asynchronous
PPS Passive Parallel Synchronous