Altera Quartus II Scripting - Manual (Page 199)

Chapter 3: Tcl Packages & Commands 3–69
chip_planner
© July 2013 Altera Corporation Quartus II Scripting Reference Manual
make_sp
Usage
make_sp [-clk ] [-io_std ] -loc -pin_name
[-regs ] [-reset ] -src_name
Options
-clk : Clock signal for the register in the SignalProbe pipeline
-io_std : I/O standard of the SignalProbe pin
-loc : Pin location of the SignalProbe pin
-pin_name : SignalProbe pin name
-regs : Number of pipeline stages for the SignalProbe pin
-reset : Reset signal for the register in the SignalProbe pipeline
-src_name : Name of the signal to probe
Description
Creates a SignalProbe pin connected to the source signal using the specified number of registers. Columns
are: Pin_name, pin_lcation, io_standard, oterm_name, number of registers, clock name, reset_name, is
enabled, and has ECO changes.
Example
make_sp