Altera Quartus II Scripting User Manual
Page 164
3–34
Chapter 3: Tcl Packages & Commands
chip_planner
Quartus II Scripting Reference Manual
© July 2013
Altera Corporation
Command
Page
add_new_cell .......................................................................................................................................... 3–35
add_new_io............................................................................................................................................. 3–36
add_usage ............................................................................................................................................... 3–37
apply_command .................................................................................................................................... 3–38
check_netlist_and_save ......................................................................................................................... 3–39
check_node.............................................................................................................................................. 3–40
close_chip_planner ................................................................................................................................ 3–41
connect_chain ......................................................................................................................................... 3–42
convert_signal_probes........................................................................................................................... 3–43
create_migrated_script .......................................................................................................................... 3–44
delete_sp.................................................................................................................................................. 3–45
design_has_ace_support ....................................................................................................................... 3–46
design_has_encrypted_ip ..................................................................................................................... 3–47
disable_sp................................................................................................................................................ 3–48
discard_all_changes............................................................................................................................... 3–49
discard_node_changes .......................................................................................................................... 3–50
enable_sp................................................................................................................................................. 3–51
export_stack_to....................................................................................................................................... 3–52
get_info_parameters .............................................................................................................................. 3–53
get_iports................................................................................................................................................. 3–54
get_node_by_name ................................................................................................................................ 3–55
get_node_info ......................................................................................................................................... 3–56
get_node_loc ........................................................................................................................................... 3–57
get_nodes ................................................................................................................................................ 3–58
get_oports................................................................................................................................................ 3–59
get_port_by_type ................................................................................................................................... 3–60
get_port_info........................................................................................................................................... 3–61
get_sp_pin_list........................................................................................................................................ 3–62
get_stack .................................................................................................................................................. 3–63
get_tile_power_setting .......................................................................................................................... 3–64
list_sps ..................................................................................................................................................... 3–65
make_ape_connection ........................................................................................................................... 3–66
make_input_port.................................................................................................................................... 3–67
make_output_port ................................................................................................................................. 3–68
make_sp................................................................................................................................................... 3–69
read_netlist.............................................................................................................................................. 3–70
remove_ape_connection ....................................................................................................................... 3–71
remove_chain ......................................................................................................................................... 3–72
remove_input_port ................................................................................................................................ 3–73
remove_old_cell ..................................................................................................................................... 3–74
remove_output_port.............................................................................................................................. 3–75
remove_usage......................................................................................................................................... 3–76
routing_path ........................................................................................................................................... 3–77
set_batch_mode...................................................................................................................................... 3–78
set_node_info.......................................................................................................................................... 3–79
set_port_info ........................................................................................................................................... 3–80
set_tile_power_setting........................................................................................................................... 3–81
undo_command ..................................................................................................................................... 3–82
update_node_loc .................................................................................................................................... 3–83