Altera Arria 10 Avalon-MM - Manual (Page 34)

PCI Express and PCI Capabilities Parameters
This group of parameters defines various capability properties of the IP core. Some of these parameters
are stored in the PCI Configuration Space - PCI Compatible Configuration Space. The byte offset
indicates the parameter address.
Device Capabilities
Table 3-5: Capabilities Registers
Parameter Possible Values Default Value Description
Maximum
payload size
128 bytes
256 bytes
512 bytes
1024 bytes
2048 bytes
128 bytes Specifies the maximum payload size supported. This
parameter sets the read-only value of the max payload
size supported field of the Device Capabilities register
(0x084[2:0]). Address: 0x084.
Completion
timeout
range
ABCD
BCD
ABC
AB
B
A
None
ABCD Indicates device function support for the optional
completion timeout programmability mechanism. This
mechanism allows the system software to modify the
completion timeout value. This field is applicable only to
Root Ports and Endpoints that issue requests on their
own behalf. Completion timeouts are specified and
enabled in the Device Control 2 register (0x0A8) of the
PCI Express Capability Structure Version. For all other
functions this field is reserved and must be hardwired to
0x0000b. Four time value ranges are defined:
• Range A: 50 us to 10 ms
• Range B: 10 ms to 250 ms
• Range C: 250 ms to 4 s
• Range D: 4 s to 64 s
Bits are set to show timeout value ranges supported. The
function must implement a timeout value in the range
50 sto 50 ms. The following values specify the range:
• None—Completion timeout programming is not
supported
• 0001 Range A
• 0010 Range B
• 0011 Ranges A and B
• 0110 Ranges B and C
3-8 PCI Express and PCI Capabilities Parameters
UG-01145_avmm
2015.05.14
Altera Corporation Parameter Settings
Send Feedback